Keep Vooozing!

Keep Vooozing!

Awesome work u should try to do like this, that’s impressive.

Keep Vooozing!

specially with human face and animal faces. and these artworks are really seems to be real.

i am sure you will get exact inspiration you want.

Keep Vooozing!

That is photography or some kind of manipulation images, but designer did it awesome manipulation work with a girl in water.

I think she is died, but her moves are not like dead women. i really inspired from these images.

i would like to share with you, and please your opinion in comment box.

Keep Vooozing!

But this time i really feel designer did it again awesome work in manipulation artwork.

in this collection they express opposite side of reality but that truly awesome.

Check it out.

Like in sense fire have bad feel in nature, but photoshop makes difference with fire in photographs.

I have collect some images, these images related about the fire but kind of different shape.

Take a Look!

It was a great experience with me, and also i have really enjoyed this practice.

These steps are so easy for anyone, and i am trying to make more easy for you. I hope u will be appreciate this post in comments.

Step 1 – Open the image of the dancer

Load the image of the dancer into Photoshop.

Step 2 – Place the image of the clouds

Choose File > Place, browse for the image of the clouds, then click OK. The image of the clouds will appear in your document window with the transform tool activated. Resize and position the clouds where you like it to appear then press enter on your keyboard to apply the changes. The reason why we use the place command rather than other methods is because the place command will place the image as a smart object (if you are using Photoshop CS2 or newer) to help keep the file size small if you save the document without the maximize compatibility option.

Step 3 – Blend the clouds

Now we’ll make the sky transparent so that only the clouds are visible. Instead of using a mask, we’ll use the blending options. This will help keep the file size small and reduce the number of layers in your document. Right click on the layer of the clouds then choose Blending Options.

In the blending options, move the black input slider towards the right until the sky disappears.

Hold the alt key on your keyboard and drag the black input slider all the way towards the right. The hard edges of the clouds should disappear and the clouds should have some transparency. Don’t click OK yet.

In the same layer style window, click on the Color Overlay option. Choose white as the color then set the blend mode to color. This is a simple non-destructive trick to desaturate a layer using layer styles. Click OK to apply the changes.

Here’s what the image looks like right now. You have just blended the cloud into the background without using any layer masks. We’re not 100% complete with blending the clouds in but we’re going to pause here and continue after we create a mask of the model.

Step 4 – Create an inverse selection of the model

Hide the layer with the clouds then select the background layer.

Select the magic wand tool then set the tolerance to 0 so that the black sweater won’t be included in the selection.

Click on the black area to create a selection of the background. You’ll get most of the background selected.

You can continue to add to the selection using the lasso tool. Or, if you’re using Photoshop CS3 or newer, switch to the quick selection tool, to easily add the bottom of the background into the selection.

If you’re using Photoshop CS3 or newer, you can use the refine edge tool to enhance the selection. Simply select any one of the selection tools then click on the “Refine Edge” button on the option bar.

Step 5 – Create a layer mask of the selection on a group

By applying the mask in a group instead of a layer, we can simply place any layer we want in this group and it will only be visible behind the model. This saves us from having unnecessary layer masks.

Select the layer of the clouds then click on the new group button in the layers palette.

With the group selected, click on the button to add a layer mask. It will automatically apply your selected area into the layer mask. Anything we put inside this group will appear around the model.

Now we’ll check to see if there are any flaws to the mask. Add a color fill layer with a contrasting color such a red. To do this, select the layer with the clouds then choose Layer > New Fill Layer > Solid Color.

Step 6 – Refine the layer mask

Zoom into 100% view to find any flaws such as this one on the shoe.

Select the layer mask in the layer palette then use the brush and eraser to refine the edges. Use the brush tool to erase the background or the eraser tool to add. In the option bar of the brush and eraser tool, you can change the brush hardness. Use a hardness of 50% or more for sharper edges.

When you’re done refining the mask, you can delete the color fill layer and make the layer with the clouds visible.

Step 7 – Complete the blending of the clouds

Add a layer mask to the layer with the clouds. To do this, select the layer then choose Layer > Layer Mask > Reveal All.

Select the eraser tool. Right click anywhere in the document window to bring up the brush options. Use a very large brush size with a hardness of 0%.

Make sure that the layer mask of the cloud layer is selected. To select the layer mask, click on the layer mask thumbnail in the layers palette. It should have a border around the layer mask to indicate that it is selected. With the eraser tool, erase the bottom of the clouds so that it fades gradually.

Select the move tool then move the clouds lower so that it is just above the spotlight.

Step 8 – Place the city background

Before you can use the place command, you need to have the layer mask deselected. Click on the layer thumbnail of the clouds layer to deselect the layer mask.

Choose File > Place. Browse for the photo of the city then click OK. Scale and position the image like shown below then press enter on your keyboard to apply the changes.

Move the layer with the city background below the layer with the clouds.

Step 9 – Desaturate the city background

First, we’ll make the layer grayscale using the same technique we used earlier with the clouds layer. Right click on the layer of the city background then choose blending options.

Apply the settings as shown below then click OK.

Step 10 – Fade the bottom edge of the layer with the city background

If you look closely at the bottom of the city edge layer there is a hard edge. To fix this, we’ll fade the edge with a layer mask.

With the layer of the city background selected, click on the add layer mask to add a layer mask.

Select the eraser tool then right click anywhere in the document window. Use a large brush with a hardness of 0%.

Make sure that your layer mask is selected. It should have a white border around the layer mask thumbnail to indicate that it is selected. With the eraser tool, erase the bottom of the edge so that the hard edge is gone.

Here’s the before and after of fading the bottom edge.

Here’s what our image looks like so far.

Step 11 – Add abstract colors to the background

Create a new layer above the clouds layer then set the blending mode to color. Now we can paint in this layer with any color and it will only affect the color of the layers below.

In the swatches palette (Window > Swatches), click on the menu then choose any one of the PANTONE CMYK swatches.

Now you have the yellow, magenta, and cyan colors easily accessible form your swatches palette.

Select the brush tool. On the option bar at the top, you can select the brush size, hardness, and opacity. I recommend starting with a 50% opacity to paint.

Select any of the first three colors in the swatches palette then begin painting.

You can overlap two colors to create other colors such as teal. Remember that you can adjust the size, hardness, and opacity of your brush for different results. Here is what we ended up with and how we got the results.

Step 12 – Add a swirling beam of light

Create a new layer inside a new group. This group will be used to store all the special effects we’ll be adding on later. Select Group 1 then click on the new group button to create a new group above it. Then, click on the new layer button to add a new layer inside Group 2.

Select the pen tool then apply the settings in the option bar as shown in the image below.

Create a curved path similar to the image below.

Select the brush tool and adjust the settings. Use the settings as shown below but adjust the master diameter setting to change the size of the brush. The size of this brush will determine the thickness of the beam of light. We used a brush size of 30 px on the high resolution file used for this tutorial. But if you are working on a low resolution file (ex. 800 x 600 pixels), then you should use a smaller brush size such as 7 pixels.

Make sure that you have the new layer in Group 2 selected. In the paths palette (Window > Paths), right click on the work path then choose stroke path.

In the stroke path dialog, select brush from the drop down menu and enable simulate pressure.

This is what our image looks like so far with the swirling beam of light. However, it doesn’t look like it is swirling around the model. In the next step, we’ll mask out certain areas to make it look like it is swirling around the model.

Step 13 – Create a mask for the swirling beam of light

Hold down the Ctrl key on your keyboard then click on the layer mask of group one.

Select the layer with the beam of light then click on the add layer mask button to add a layer mask. It should apply the selected area as the layer mask.

Make sure that you have the new layer mask selected. Select the brush tool the paint in white over the areas shown in the image below. This will make the beam of light look like it is swirling around the model.

Step 14 – Create a lens flare

Create a new layer as the top layer in Group 2 then fill it with black.

Choose Filter > Render > Lens Flare. Set the brightness to 100% and choose movie prime as the lens type. Adjust the flare center to get a flare that you like then click OK.

Choose Image > Adjustments > Hue/Saturation then apply the settings as shown below. If you are using Photoshop CS3 or older, enable the colorize option first then adjust the hue and saturation settings.

Step 14 – Duplicate and position the lens flare

First, change the blend mode of the lens flare layer to screen.

Select the move tool then reposition the lens flare to models right top hand.

While holding down the Alt key on your keyboard, drag the lens flare to the models left hand. This will create a duplicate of the lens flare.

Step 15 – Mask the lens flare

We want to make the second lens flare appear as behind the models hand. To do this, we’ll mask it out using a layer mask. Click on the add layer mask button to add a layer mask.

Select the eraser tool then use a large brush with 0% hardness.

Erase over the hand and arm so that the lens flare looks like it is behind the hand.

Here’s the before and after results.

Step 16 – Merge the lens flare layers

Because we will not need to reposition the lens flare anymore, we can merge them together. If you simply merge the two layers right now, the layer mask will be lost. To preserve the layer mask, move the layer without the layer mask up so that it is on the top. Then, choose Layer > Merge Down or Ctrl+E.

A dialog will appear asking if you want to apply or preserve the layer mask. Select preserve.

Now the two layers are merged and the layer mask is still there.

Step 17 – Import the image of the shattered glass

Choose File > Place, browse for the image of the shattered glass, then click OK. Press enter on your keyboard to exit out of the transform tool.

Step 18 – Add transparency to the glass layer

Using the same technique used earlier, we’ll make the dark area of the layer transparent so that it blends into the photo. Right click on the layer with the glass then choose Blending Options.

At the bottom of the window in the blend if options, drag the black input sliders towards the right until the background disappears.

Hold the Alt key on your keyboard then drag the right black input slider towards the right until the edges are softened.

Change the blending mode of the current layer to luminosity. This will allow the color from the layers below to be seen through the glass.

Step 19 – Prepare the layers

Duplicate the layer with the glass (Layer > Duplicate Layer)

Hide the other layer by clicking on the visibility icon.

Step 20 – Distort the first glass layer

With the current glass layer selected, choose Edit > Free Transform to use the transform tool. Hold down your left mouse button anywhere inside the boundary border then drag it to the models left ankle.

While holding down the Alt key on your keyboard, drag the upper middle handle downwards so that your shattered glass looks like the image below.

Rotate the layer like shown below. To rotate, position your cursor outside the bounding border then drag to rotate.

While holding down the Ctrl key on your keyboard, drag the bottom left handle towards the bottom left like shown below.

While holding down the Ctrl key, drag the bottom right handle towards the upper left like shown below. Press enter on your keyboard to apply the changes.

Step 21 – Distort the second glass layer

Select the other shattered glass layer then enable back the visibility by clicking where the visibility icon should be.

Like before, we’ll use the transform tool to distort the layer. Choose Edit > Free Transform then position the center of the shattered glass at the models other ankle.

While holding down the alt key, drag the upper middle handle towards the bottom to shrink the layer like shown in the image below.

Rotate the layer like shown below by clicking anywhere outside the boundary border and dragging.

While holding down the Ctrl key on your keyboard, drag the top left corner downwards. Press enter on your keyboard to apply the changes.

Step 22 – Swap the layers

Switch the position of the two shattered glass layers. Move the bottom one above the top one. This is because the shattered glass on the models left ankle is supposed to appear in front of his left ankle.

Here’s a before and after comparison of switching the layers. You can see that the shattered glass doesn’t appear to be wrapping around the models legs. We’ll fix this with a layer mask in the next step.

Step 23 – Add masks to the shattered glass layers

Select the second layer with the shattered glass then click on the button to add a layer mask.

Zoom in to 100% and use the move tool to position the center of the shattered glass on the leg.

Select the eraser tool, right click anywhere in the document window, then set the hardness to 100%.

Erase the upper part of the shattered glass that touches the leg and the beam of light like shown below. Now it looks like the shattered glass is wrapped around the leg but not in front of the beam of light.

We’ll repeat this for the other leg. Select the other layer then click on the to add a layer mask.

Like before, erase the upper area of the shattered glass that touches the leg as shown below.

Step 24 – Make the beam of light glow

To finish this photo manipulation, we’ll make the swirling beam of light glow. Right click on the layer with the beam of light then choose blending options.

Select the outer glow layer style then adjust the size until you see a glow on the beam of light.

Select a color that you like for the glow.

Next, enable the inner glow layer style and zoom in so that you can see the beam of light. Press Ctrl+ to zoom in and drag in the document window to reposition. Set the blend mode to normal.

Set the color to the same or similar color you used in your outer glow layer style then adjust the size so that the inner glow is more visible.

Final Results

Download the PSD file

High resolution JPG image (2.58 MB)
Low resolution watermarked Photoshop document (4.58MB)
High resolution watermarked Photoshop document (112 MB)

But now i m going to show u a manipulation tutorial with some images, and i have seen this complete process from a site, they are awesome.

anyways take a look on the main banner and read it all post and find out How To Make Photo Manipulation with Your Own Photos and Textures.

Step 1 – Preparation for Taking the Photos

Usually tutorials start with a list of stock photos you should download. But today we’ll make it differently. The only one thing you have to do is to take your camera outside and shoot your own images! Don’t worry, it doesn’t take much of your time and you don’t have to be an awesome photographer.

If you want to take stock photos it’s good to do it when it is cloudy outside because in this case you will have no strong directional light from the sun but nice diffuse light, which will be easy to change in your graphic program to fit with the global light of your photo manipulation.

When you’re taking stock photos it’s always a good to take it from different angles and directions because you never know what you will find useful for your photo. And it would be bad if you would have a perfect photo, but you would need it just rotated a little different.

Step 2 – Taking Photos for the Background

As I said before, take your camera outside and take the picture which will suit for the background. For this manipulation we need an easy background with not so much details on it. This absence of details helps the mood which we’ll try be creating of a hopeless situation or feeling of loneliness or emptiness.

As you can see in the picture below, I used a simple photo of the concrete behind my house. A photo of some empty parking place,field or road would be great too. You can see the angle from which I took the photo.

Step 3 – Taking Photos of The Sky

window and shoot a few pictures of sky. Shaped clouds are the best because the sky will not be boring. It should be dramatical and this type of clouds is best for it.

On the picture below you can see what kind of sky I mean.

And below is an example of the sky which doesn’t look as good.

Step 4 – Taking the Photo Texture for the Monument

It’s very easy again. For the monument we’ll use texture of some beaten wall – so just stand in front of some wall and shoot it It’s good to stand directly in front of the wall because this way there will be no perspective distortion in the photo.

If you want to use exactly this texture (shown above) you can download the texture pack from my deviantArt page, but I recommend you shoot your own.

Step 5 – Taking Photos of People

This is the last step before we start to do the photo manipulation. Take your camera to a train station or another similar place where there is a big concentration of people. Be a little like a paparazzi, and shoot some of them. Don’t worry if you’re shy, you can shoot them from a distance (depends on the zoom of your camera).

It would be enough to have five or six types of people for what we’ll be creating.

Step 6 – Preparing the Background

After you downloaded all necessary photos from your camera to the computer open Photoshop and drag the picture of the ground and of the sky into one document. Name the layer’s appropriately as: “GROUND” and “SKY.” Make sure that “SKY” is above the “GROUND.” It’s always good to name all the layers. This way you can orientate everything better in your PSD file.

Add a vector mask to the “SKY.” You can find the button Add Vector Mask at the bottom part of the Layers palette. If you don’t see the Layers just press F7 and it will appear.

It is better to use a vector mask instead of the Eraser Tool because this way all the steps you do are non destructive, and you can change them anytime. If you paint with a black color over the vector mask, then the picture disappears. If you want to have it visible again, the only thing you have to do is paint white over it.

After you have vector mask added to the “SKY,” grab the Brush Tool (B), select a soft round brush, pick black for the color, and paint over the areas which should be hidden. Change to a smaller size of brush for more precise blending. You can also change the opacity of the brush to get a better result.

After this step, my manipulation looks like the image below. Yours should be similar, but it depends on your stock pictures used.

If your background doesn’t look realistic you can try one of two tricks. At first you can use the Spherize Filter, which will help you to add more space into the manipulation. To use it go to Filter > Distort > Spherize… and set the Amount to a negative value.

The next thing you can do is transform the perspective. To do it go to Edit > Transform > Perspective and transform your “GROUND” layer as you need.

What I did in my manipulation is that I added texture to the ground to add more details. If you want to try it too, you can use the texture you took for the monument. Open the picture with texture, drag it into the manipulation, place it above the “GROUND” (you can also create a Clipping Mask from it), and name it “TEXTURE FOR GROUND.” Now change the Opacity of the layer and also the Blending Mode. I just changed Blending Mode to Overlay.

As you can see the ground should have more cyan tones than it has now. To fix that add a new adjustment layer of Color Balance above the “GROUND” layer. If you don’t know how to add an adjustment layer, then look at the image below.

Click on the button which is circled and select Color Balance. The button is on the same palette (Layers) as the Add Vector Mask button which we used a few steps back.

Set the Color Levels to: -6, 0, and +12 in Midtones and press OK.

I think it would be better if the whole background would be a little darker. To do that add an adjustment layer of Levels above the “GROUND” and “SKY.” Set Input Levels to: 31; 0,85; 255 and press OK.

Step 7 – Creating the Monument

In this step we will create the monument. Open the picture of texture you took and drag it into your photo manipulation. Name the layer “MONUMENT.” Resize it to proper proportions. To do that press Command + T, and hold Shift to make the picture smaller. If you hold Shift, then the width and height will have the same proportion as they had before.

Press Command + T again and make the picture a little slimmer. Then go to Edit > Transform > Perspective and change the perspective so the monument will be slimmer on the top and wider on the bottom.

Add a Vector Mask to the monument. Now use a soft, round brush to make the bottom part of the monument softer.

At this point, my photo manipulation looks like the one below. You should have something similar, but again – it depends on your stock photos used.

Step 8 – Color Adjustment of the Monument

Now change the colors and contrast of the monument so it fits in with the rest of the picture. This step depends on what stock photos you took. For inspiration I will show you what I did.

The monument should be a bit darker and have more contrast for this look. Add a new adjustment layer of Levels above the “MONUMENT” and set Input Levels on 31; 0,79;255. Just for your information, the first value makes dark tones (shadows, etc.) darker. The second changes midtones. If you increase this value, then the midtones are darker. If you decrease it, then the midtones are lighter. The third value changes highlights.

Step 9 – Creating the Light Ray

In this step we will create a light ray on the top of the monument. Create a new layer above the “MONUMENT” and name it “LIGHT RAY.” Now grab the Brush Tool (B), select a soft, round brush and choose a proper size (depends on size of your photo manipulation). Pick a very light color. It can be pure white or something a little more yellowish.

Paint one dot on the top of the monument and then one dot on the place where you want the ray to end. During the painting of the second dot hold Shift. It will paint you a nice line. Instead of this method you can also use the Line Tool.

Once you have the line you can press the button Add a Layer Style, which can be found in the bottom part of the Layers palette, and add an Outer Glow to the ray to make it look more realistic. In my case, it wasn’t necessary.

Add a Vector Mask to the “LIGHT RAY.” Now with a black, soft, round brush and low opacity, paint over the top of the light ray. It will look more realistic, as if the light is less intensive and it is far from the monument.

In the picture below you can see the manipulation with the light ray.

There should be some diffuse light around the top of the monument. To add it go ahead and create a new layer above the “MONUMENT” and name it “DIFUSE LIGHT.” Grab the Brush Tool (B), select the same color as for the light ray, lower the opacity of the brush and make it bigger. Now paint a little over the top of the monument. In the picture below you can see what I mean.

Step 10 – Adding People

In this step we will add the people you shot with your camera. But before we do that let me say a few words about perspective. To add depth to the manipulation it’s important to keep the rules of the perspective in mind. It’s very simple – objects which are closer are bigger than those which are farther away.

The next important thing you should know when you’re creating a photo manipulation is that objects which are closer are darker and more saturated. If you want to make this rule even stronger you can make closer object also sharper and with more details.

Open your stock photos of people, cut them out and drag them into the manipulation. Change the size of them, duplicate them a few times and start arranging them. You can flip (Edit > Transform > Flip Horizontal) them to have more variation. Arrange them as you below.

As you can see I added no people in the distance. It’s because we will use a special brush which we’ll create in the next step.

Step 11 – Creating the Brush

Creating your own brushes is very simple and can also be very useful. Open a new document and drag one layer with a man into it. Command-click on the thumbnail of this layer. It activates the mask of the layer.

Grab the Gradient Tool (G), pick a solid black color and fill the mask with black. Now use the Crop Tool (C) to crop the picture. You should have something like that shown below.

Now go to Edit > Define Brush Preset… Press OK in the window which will open and you’re done. You have your own brush!

Go to your photo manipulation, Grab the Brush Tool (B) and select the brush you’ve just created. Pick a dark gray and paint people in the distance. Don’t forget to make people smaller and lighter when they are further away.

You can create more types of brushes to have more variation.

Step 12 – Adding Shadows

There should be shadows under the monument and from people. To fix that add a new layer above all the layers and name it “SHADOWS.” Grab the Gradient Tool (G), pick the color #808080, and fill the layer with it. Now change the Blending Mode of the layer to Overlay.

You have two options on how to make shadows. At first you can paint them with a black brush or use the Burn Tool. In the picture below you can see how the “SHADOWS” layer should look.

Step 13 – Adding Mist

Download some mist brushes (I used these) and install them into Photoshop. If you don’t know how to install brushes, then look at this tutorial. Add a new layer under the “MONUMENT,” name it “MIST,” and paint a nice fog with a white color.

Step 14 – Applying Texture

If you want your manipulation to have a grungy look you can add some grunge texture, which you will download or (like me) you can use the same texture which you used for creating the monument.

Open the document with the texture and drag it into the photo manipulation on the top of your layers. Name it “TEXTURE.” Then change the Blending Mode of the layer and also the opacity. I used an Overlay blending mode and Opacity of 30%, but you can experiment with different modes and opacities to get some interesting results.

Step 15 – Final Adjustment

This step depends on the photos you used again. For inspiration I will show you what I did.

I want the picture to be a little darker. To fix it, add a new adjustment layer of Levels on the top of the layers and set the Input Levels on: 0; 0,84; 255.

You can also add a vignette. Add one more Levels adjustment layer and now set the Input Levels on: 0; 0,55; 255. Grab the Gradient Tool (G), pick a solid black color, and fill the Layer Mask with it.

Now pick a white color, Grab the Brush Tool (B), and paint over the edges of the layer mask. It makes them darker.

Conclusion

Congrats! You’re finished. I hope that you’ve learned something new in this tutorial. Experiment with taking your own stock photos, which you can use in your photo manipulations!

Data Source